AHU – according the market demand

2018-12-19

From 2013, KOMFOVENT has implemented LEAN and 5S quality management systems that aim to create value for the customer by using smaller resources and increase our competitive edge in the market. The integrated business process management system is very well suited for both standard and non-standard (individual design) products.

A special, EUROVENT-certified device selection program helps you to select an efficient ventilation unit that precisely meets the design requirements . High level of automation helps to save human resources and avoid mistakes, while flexible production planning system helps to use production resources better.

Below are some non-standard, tailor-made for the needs of different markets, examples of ventilation units.

For Norwegian market – lower voltage units

In Norway, unlike in other European countries, the three-phase power supply is not 3x400V but 3x230V, which means that KOMFOVENT produces specialized three-phase air handling units VERSO PRO and VERSO STANDARD adapted for lower voltage for the Norwegian market.

For French market – only metal impellers

In accordance with the active law in France, the plastic impellers cannot be used in the ventilation unit. Also, the entire air flow system must be fire-resistant.

For the customers working in the French market KOMFOVENT has developed a special version of the VERSO Pro Selection Program, with the help of which you can choose metal fan impellers. Also, specially designed for the French market, VERSO Standard units with metal fan impellers have been developed.

More about the law itself (in the original language) may be found here:

For Swedish market – special “Fire Function”

VERSO PRO devices with a special fire function are produced for the Swedish market – i.e. the unit starts operating as part of the smoke removal system. The Fire Function feature in the KOMFOVENT VERSO Device Selection Program has several options:

  • By default, the unit receives a signal of fire and switches off. The design of the device is standard.
  • FORCE EXTRACT. Depending on the requirements of the country, it is possible to choose: after receiving a fire signal, the exhaust air fan will start to extract the smoke from the premises and the supply air fan will stop. An additional damper which is installed in the premises, will be closed. The additional section, which is installed in front of the heat exchanger, will start to work the maximum intensity removing the smoke from the premises through the opened additional damper.
  • FORCE BOTH. Depending on the requirements of the country, it is possible to choose: if a fire signal is received, the exhaust air fan will start to extract the smoke from the premises and the supply air fan will supply the fresh air. An additional damper, which is installed in the premises, will be closed. The additional section which is installed in front of the heat exchanger will start to work with the maximum intensity removing smoke from the premises through the opened additional damper. The supply air fan starts to operate at maximum intensity.

 

For Swiss market – different electrical sockets

DOMEKT air handling units made for Swiss market are adapted for Swiss electrical sockets, i. e. the plug connector of the unit differs from the plugs used in other European countries.

The quality of KOMFOVENT in the company is primarily understood as listening to customer needs, offering the best technological solutions. The company grows and develops products to meet the ever-changing needs of consumers and partners.